HC-60 - Ozone Generator - 60 gram/hr

The HC-60 Ozone Generator is capable of producing ozone at up to 12% by weight, at 1 LPM of oxygen flow. This generator will produce 60 g/hr of ozone. This is the perfect ozone generator for applications where high concentrations of ozone are needed at low oxygen flow rates. This makes for a low cost, and easy to use, setup for your laboratory, or other high O₃ concentration application. 

The HC-60 can be mounted in a standard 19" rack, or be used as a bench-top ozone generator. This is an easy to use, convenient ozone generator for your application.

Features

• 60 g/hr Ozone from 12 LPM of Oxygen at 6% by weight
• Ozone Produced at up to 5-12% by weight
• Adjustable Ozone Output From 0-100%
• Air Cooled, Rack Mountable Ozone Generator
• Efficient ozone production with low operating costs
• Standard working pressure of 20 PSI
• Great Ozone Production with High Ozone Concentrations, have the best of both!

More Information
Concentration at Rated Flow	3.70%
Max Operating Pressure	50 PSI (3.52 Bar)
Supply Gas	Oxygen
Adjustable Ozone Output Dial	No
Cooling	Air Cooled
Corona Cell Materials	Aluminum with Ceramic Dielectric
Flowmeter	No
Pressure Gauge	No
Operating Frequency	High Frequency 5,000 - 30,000 Hz
Ozone/Oxygen Connections	1/4" Stainless Steel Compression
Ozone Output	60 grams/hour (3.17 lbs/day)
Weight	32.000
Electrical	120 VAC 60 Hz
Dimensions	7 x 19 x 14 inches (17.8 x 48.3 x 35.6 cm)
Warranty	Ozone Solutions Warranty: 1 Year Manufacturer Warranty: 5 Years
Rated Flow	20 LPM (42.38 SCFH)
In Stock	Call for Availability
Oxygen Requirements	Minimum 90% Oxygen Concentration At 25-30 PSI Required

 

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.