20 grams/hour of ozone will be produced by this ozone generator from 6 LPM of oxygen. This ozone generator uses a double quartz dielectric. This means that the oxygen and ozone gas will only contact Teflon tubing and a quartz dielectric, providing pure ozone/oxygen gas streams. This is useful for lab applications and any application where pure gas streams are a necessity.
A panel mount flow meter, status light, and a simple ON/OFF switch are all features of this ozone generator.
Features
20 g/hr Ozone from 6 LPM Oxygen at 4% by weight
Double Quartz corona cell for pure ozone generation
Air cooled, wall mounted ozone generator
No minimum feed gas flow required
Integrated, panel mount flow meter
More Information
Concentration at Rated Flow
4%
Max Operating Pressure
5 PSI (0.35 Bar)
Supply Gas
Oxygen
Adjustable Ozone Output Dial
No
Cooling
Air Cooled
Corona Cell Materials
Double Glass, no metal parts
Flowmeter
Yes
Pressure Gauge
No
Operating Frequency
Medium Frequency 100 - 2,000 Hz
Ozone/Oxygen Connections
1/8-inch Female NPT connections - 1/4-inch barb fittings are provided
Ozone Output
20 grams/hour
Weight
26.5 lbs (12.0 kg)
Electrical
120 VAC 60 Hz
Dimensions
12.5 x 7 x 20.5 inches (31.8 x 17.8 x 52.1 cm)
Warranty
Ozone Solutions Warranty: 1 Year Manufacturer Warranty: 3 Years
Rated Flow
6 LPM (12.71 SCFH)
Operationg Pressure
0.0 to 5 PSI (0.0 to 0.35 Bar)
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.