OZV-4 : 4 gram/hour Ozone Generator

Contact Sales @ (888) 892-0303 For Pricing

SKU:
OZV-4
Condition:
New
Click here to zoom
  • V-10 : Low Flow Air Dryer
  • Onyx : Oxygen Concentrator

Product Overview

Ozone Solutions

This ozone generator will produce 4 g/hr ozone from 6 LPM of oxygen at 0.8% by weight, or 2 g/hr of ozone from 6 LPM of dry air at 0.5% by weight. 

This flexible ozone generator will produce ozone from either a dry air, or oxygen feed gas. This generator can also operate under a -5 PSI vacuum or 5 PSI of pressure. 

This ozone generator has tabs to be wall mounted, however, it can also operate as a table top system, because orientation will not affect the operation.

What makes the OZV-4 different

The OZV-4 is great for small water treatment applications, where a venturi injector is used with a vacuum air dryer. Since the OZV-4 can operate under a vacuum, there is no need for added components or moving parts.

Features

  • 4 g/hr Ozone from 6 LPM Oxygen at 0.8% by weight
  • 2 g/hr Ozone from 6 LPM Dry Air at 0.5% by weight
  • Air cooled, wall mounted ozone generator
  • Flexible ozone generator operates under a pressure or vacuum
  • No minimum feed gas flow required

More Information

 
More Information
Concentration at Rated Flow 0.80%
Max Operating Pressure 5 PSI (0.35 Bar)
Supply Gas Dry Air or Oxygen
Adjustable Ozone Output Dial Optional
Cooling Air Cooled
Corona Cell Materials Stainless Steel with Glass/Quarts Dielectric
Flowmeter No
Pressure Gauge No
Operating Frequency Medium Frequency 100 - 2,000 Hz
Ozone/Oxygen Connections 1/8-inch Female NPT connections - 1/4-inch barb fittings are provided
Ozone Output 4 grams/hour
Weight 10.0 lbs (4.54 kg)
Electrical 120 VAC 60 Hz
Dimensions 10 x 4 x 17 inches (25.4 x 10.2 x 43.2 cm)
Warranty 1 Years
Rated Flow 6 LPM (12.71 SCFH)
Operating Pressure -5 to 5 PSI (-0.35 to 0.35 Bar)

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.