OZV-8 - Ozone Generator - 8 gram/hr

Write a Review

Log in for pricing

Usually Ships Within 4 Weeks of Order Date
15 lbs.
Wall Mount
Click here to zoom

Product Overview

Ozone Solutions

When using an Oxygen feed-gas, the OZV-8 will produce 10 g/hr of ozone from only 4 LPM oxygen. Ozone concentrations greater than 6% by weight are possible at flow rates of 1 LPM. When using a Dry-Air feed-gas, the OZV-8 will produce 4 g/hr ozone from 7 LPM of air-flow. The integrated circuit board is programmed with No-Flow, or Low-Flow protection. By default, this programming will shut off ozone production at flow rates lower than 2 LPM, and resume ozone production at flow rates above 3 LPM. If your application requires a lower flow rate, we can customize the programming as needed. Please check the Flow-Switch Delete option when purchasing if you would like the system to operate using lower pressures than 2 LPM. 

This flexible ozone generator will produce ozone from either a dry air, or an oxygen feed gas. This generator can also operate under a -5 PSI vacuum or 5 PSI of pressure. This ozone generator has tabs to be wall mounted. However, it can also operate as a table top ozone system, because orientation will not affect the operation.

What makes the OZV-8 different

The OZV-8 Ozone Generator can operate on dry-air, or an oxygen feed-gas. The OZV-8 can also operate under a vacuum of up to -5 PSI, and a pressure of up to 5 PSI. Very few, if any ozone generators offer this range of flexibility.


  • 10 g/hr Ozone from 4 LPM Oxygen at 3% by weight
  • 4 g/hr Ozone from 7 LPM Dry Air at 0.65% by weight
  • Air cooled, wall mounted ozone generator
  • Flexible ozone generator, operates under a pressure or vacuum
  • On-board, No-Flow programming will stop and start ozone production based upon flow
  • Integrated 10-position switch to adjust ozone output electronically
 More Information
 Concentration at Rated Flow
 Max Operating Pressure
5 PSI (0.35 Bar)
 Supply Gas
Dry Air or Oxygen
 Adjustable Ozone Output Dial
Air Cooled
 Corona Cell Materials
Stainless Steel with Glass/Quarts Dielectric
 Pressure Gauge
 Operating Frequency
Medium Frequency 100 - 2,000 Hz
 Ozone/Oxygen Connections
1/8-inch Female NPT connections - 1/4-inch barb fittings are provided
 Ozone Output
8 grams/hour
15.0 lbs (6.8 kg)
120 VAC 60 Hz 105 watts
10 x 5 x 17 inches (25.4 x 12.7 x 43.2 cm)
Ozone Solutions Warranty: 1 Year
Manufacturer Warranty: 3 Years



Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.