The Topaz Oxygen Concentrator delivers up to 12 SCFH oxygen at delivery pressures up to 9 PSI. The Topaz is a rugged and durable oxygen concentrator boasting the best reliability and lowest cost long term operation of any oxygen concentrator.
The Topaz+ Oxygen Concentrator delivers up to 17 SCFH oxygen at delivery pressure up to 20 PSI.
The Topaz Ultra Oxygen Concentrator delivers up to 21 SCFH oxygen at delivery pressure up to 20 PSI. 20 PSI.
What makes the Topaz different
In our experience the Topaz is the most reliable and durable packaged oxygen concentrator we have ever used. It also has the lowest cost repair and maintenance parts of all oxygen concentrators we have used.
Produces 12 SCFH oxygen at up to 9 PSI
Quiet operation at only 55 decibals
Designed for maximum reliability and durability
Integrated flow meter and pressure gauge
Attractive cover is standard
Automatic and unattended operation
Easy to operate and maintain
55.0 lbs (24.9 kg)
20.5" x 13" x 27" (52.1 x 33 x 68.6 cm)
9 PSI (0.63 Bar)
Oxygen Flow Rate
5.66 LPM (12 SCFH)
Oxygen Delivery Pressure
9 PSI (62 kPa)
Up to 95%
Product Dew Point
19" x 10" x 27" (48 x 25 x 68 cm)
53 lbs (24 kg)
(Add 2 lbs for 220 V Unit)
(Add 20 lbs for Stainless Steel)
Physical Connections Product Gas Outlet
1/4" NPT-M/B-M size oxygen adapter
Ambient Operating Conditions
Locate the oxygen concentrator system in a well-ventilated area that is protected from weather elements.
Temps should remain between 40°F (4°C) and 112°F (44°C)
Control Power Requirements (Single Phase)
120 V ~ ± 10%, 60 Hz, 5.0 A
220 V ~ ± 10%, 50 Hz, 2.5 A
220 V ~ ± 10%, 60 Hz, 2.3 A
Topaz Infomation Sheet
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.