Air Vent - AVO3 Ozone Compatible

Ozone Solutions

Write a Review
California Regulatory Information

SKU: 007797
SKU:
007797
Condition:
New

Product Overview

Ozone Solutions

This ozone compatible air vent safely removes ozone from pressurized vessels. All ozone compatible materials ensure years of life. See-through material allows quick visual inspection.

The AVO3 can remove 4.3 SCFM @ 15-PSI pressure differential or 24.3 SCFM @ 150-PSI pressure differential.

Features

  • See-through body shows it is working
  • Completely ozone compatible
  • Quick installation
  • Rugged, dependable
  • Serviceable design
  • Quantity discounds available
 
 More Information
 Weight 1.3 lbs (0.59 kg)
 Dimensions Length: 6.8 in (17.1 cm) Diameter: 3.5 in (8.9 cm)
 Warranty 1 Year
 Flow Rate (CFM) 1 CFM
 Max Pressure 150 PSI (10.55 Bar)
 Fluid Connection 34 Inch FNPT
 Max Temperature 150°F (65.56°C)
 Orifice Size 18 Inch
 Material List Stainless Steel, Polysulfone, Viton®

FAQ's

How do I know if I need an ozone compatible air vent?

An ozone compatible air vent is needed if you intend to fill a vessel with ozonated water and keep it under pressure. Air vents ensure that air/ozone can escape from a water tank thereby preventing air from collecting inside. Remember that in certain ozone injection setups, ozone/air can also collect in water pipes. If this occurs ozone gas will be ejected out of nozzles which can cause harm to personnel. An air vent can keep your employees safe!

What is important when considering an air vent?

One of the most important features in an air vent is a large process connection. The process connection on the AVSS-11 is 3/4-in FNPT. This is important because water and air must pass through the process connection at the same time, in different directions.

What is important when considering an air vent?

One of the most important features in an air vent is a large process connection. The process connection on the AVO3 is 3/4-in FNPT. This is important because water and air must pass through the process connection at the same time, in different directions.

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

Example Image
Use in unoccupied spaces only.
Health hazard warning: emits ozone.

This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.