Personal Ozone Badge - Easy To Use - B1-Y

SAFEAIR System

Write a Review
California Regulatory Information

SKU: 010739
SKU:
010739
Condition:
New

Product Overview

The SafeAir Ozone badge may be used for personnel or area monitoring for exposure time from 15 minutes to 48 hours. Ozone is a bluish gas with a pleasant, characteristic odor in concentrations of less than 2 ppm. In higher concentrations, the odor is pungent and irritating. Ozone is a severe irritant to the eyes and the mucous membranes. Long-term exposures will cause pulmonary edema (abnormal fluid build up in the lungs) and chronic respiratory disease. OSHA and NIOSH exposure limit for ozone is 0.1 ppm (TWA).
 
Ozone is used as a disinfectant for air and water. It is also used to bleach waxes, textiles and oils.

Operation

The SafeAir ozone badge is a monitoring system designed to indicate the presence of ozone at concentrations at the permissible exposure limit. The SafeAir ozone badge detects the presence of ozone by forming a color change in the shape of an triangle with an exclamation mark inside. This indication is produced by a color-forming reaction which occurs when ozone reacts with a flat indicator layer.

  • Minimum recommended sampling time: 15 minutes
  • Maximum recommended sampling time: 2 days
  • Minimum detectable limit, 8 hours: 0.001 ppm

Best if stored in a sealed container in a cool, dark place. Avoid prolonged exposure to direct sunlight, especially during storage.

Features

  • 0 - 0.2 PPM
  • Convenient visual indication of ozone exposure
  • 6-12 month refrigerated life
  • 10 Badges per pack (includes 2 badge clips)
 
 More Information
 Weight 0.0000
 Electrical 0 VDC
 Dimensions 1.6 x 0 x 2.9 inches (4.1 x 0.1 x 7.4 cm)
 Warranty 0 Months
 Display None
 Detection Method Proprietary Chemical
 Temperature Range 60 to 91°F (15.56 to 32.78°C)
 Accuracy +/- 8,000%
 Resolution 0.0 ppm (0.0 ppb)
 Humidity Range 30 to 80%
 Internal Datalogging No
 Display Units ppm
Comms. Protocol None
 Relays 0

 

 

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

Example Image
Use in unoccupied spaces only.
Health hazard warning: emits ozone.

This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.