Hess H-25 - Ozone Injection System - High Flow

Hess Machine Ozone Generators were designed for use in the bottled water industry. These ozone generators produce ozone from dry air with an integrated air dryer, meaning only compressed air and electricity are required for operation. These are the most reliable and robust ozone generators in production today. The Hess Machine Ozone Generators can be used for any application where ozone from dry air is required. These generators are well built and reliable, allowing them to provide you with many years of operation.

What makes the H-25 different

The H-25 is an air cooled ozone generator that produces ozone from dry air. This is an extremely simple and reliable machine.

Features

• 4.5 g/hr Ozone from 15 SCFH Dry Air at 1% by weight
• Ozone generated from dry air with integrated air dryer
• Water cooled ozone generator
• Line frequency ozone generator provides extremely reliable operation
• Adjustable Output

More Information
Concentration at Rated Flow	1%
Max Operating Pressure	15 PSI (1.05 Bar)
Supply Gas	Integrated Air Dryer
Adjustable Ozone Output Dial	Yes
Cooling	Air Cooled
Corona Cell Materials	Stainless Steel with Glass/Quarts Dielectric
Flowmeter	Yes
Pressure Gauge	Yes
Operating Frequency	Line Frequency 50/60 Hz
Ozone/Oxygen Connections	1/4" Female NPT Connecitons
Weight	140.0 lbs (63.5 kg)
Electrical	120 VAC 50/60 Hz (220V/50Hz Available)
Dimensions	37 x 16 x 45 inches (94 x 40.6 x 114.3 cm)
Warranty	1 Year
Rated Flow	7.08 LPM (15 SCFH)
In Stock	In Stock
Shipping Weight	290 lbs.
Air Dryer Type	Desiccant - Pressure Swing Absorption
Operating Pressure	10 to 13 PSI (0.7 to 0.91 Bar)

 

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.