VMUS - 4-22 g/hr - Ozone Generator

OZV-4

This ozone generator will produce 4 g/hr ozone from 6 LPM of oxygen at 0.8% by weight, or 2 g/hr of ozone from 6 LPM of dry air at 0.5% by weight.

This flexible ozone generator will produce ozone from either a dry air, or oxygen feed gas. This generator can also operate under a -5 PSI vacuum or 5 PSI of pressure.

This ozone generator has tabs to be wall mounted, however, it can also operate as a table top system, because orientation will not affect the operation.

What makes the OZV-4 different

The OZV-4 is great for small water treatment applications, where a venturi injector is used with a vacuum air dryer. Since the OZV-4 can operate under a vacuum, there is no need for added components or moving parts.

Features

• 4 g/hr Ozone from 6 LPM Oxygen at 0.8% by weight
• 2 g/hr Ozone from 6 LPM Dry Air at 0.5% by weight
• Air cooled, wall mounted ozone generator
• Flexible ozone generator operates under a pressure or vacuum
• No minimum feed gas flow required

OZV-8

When using an Oxygen feed-gas, the OZV-8 will produce 10 g/hr of ozone from only 4 LPM oxygen. Ozone concentrations greater than 6% by weight are possible at flow rates of 1 LPM. 

When using a Dry-Air feed-gas, the OZV-8 will produce 4 g/hr ozone from 7 LPM of air-flow. 

The integrated circuit board is programmed with No-Flow, or Low-Flow protection. By default, this programming will shut off ozone production at flow rates lower than 2 LPM, and resume ozone production at flow rates above 3 LPM. If your application requires a lower flow rate, we can customize the programming as needed. Please check the Flow-Switch Delete option when purchasing if you would like the system to operate using lower pressures than 2 LPM. 

This flexible ozone generator will produce ozone from either a dry air, or an oxygen feed gas. This generator can also operate under a -5 PSI vacuum or 5 PSI of pressure. 

This ozone generator has tabs to be wall mounted. However, it can also operate as a table top ozone system, because orientation will not affect the operation.

What makes the OZV-8 different

The OZV-8 Ozone Generator can operate on dry-air, or an oxygen feed-gas. The OZV-8 can also operate under a vacuum of up to -5 PSI, and a pressure of up to 5 PSI.

Very few, if any ozone generators offer this range of flexibility.

OZV-20

20 grams/hour of ozone will be produced by this ozone generator from 6 LPM of oxygen. This ozone generator uses a double quartz dielectric. This means that the oxygen and ozone gas will only contact tubing and a quartz dielectric, providing pure ozone/oxygen gas streams. This is useful for lab applications and any application where pure gas streams are a necessity.

A panel mount flow meter, status light, and a simple ON/OFF switch are all features of this ozone generator.

Features

• 20 g/hr Ozone from 6 LPM Oxygen at 4% by weight
• Double Quartz corona cell for pure ozone generation
• Air cooled, wall mounted ozone generator
• No minimum feed gas flow required
• Integrated, panel mount flow meter