Product Overview
These fine-pore diffusers are used specifically for ozone applications. They come in several sizes to accommodate your reaction vessel & flowrate. Glass-bonded diffusers & Kynar (or SS) material ensure long life in ozone rich environments.
Features
- Completely ozone resistant
- Resistant to clogging
- Easily cleaned with HCl
- Self weighing
More Information
| Weight | 0.37 lbs (0.17 kg) |
|---|---|
| Dimensions | 1.5 x 1.5 x 3 inches (3.8 x 3.8 x 7.6 cm) |
| Warranty | 1 Years |
| In Stock | In Stock |
| Connection Size | 1⁄4 Inch Barb |
| Fitting Material | Kynar |
| Max Pore Size | 80 microns |
| Material List | Kynar, Glass-Bonded Silica |
| Max Flow Rate LPM | 10 LPM |
FAQ's
How do I clean the diffuser?
The only maintenance normally required is periodic cleaning. (1) Remove from service and blow off excess water, clean off any foreign material. (2) Immerse completely in undiluted muriatic acid for a sufficient time to dissolve the clogging material. This may take from one minute to eight hours in extreme cases. Please take all necessary precautions when working with acid. (3) After clogging material has been dissolved, rinse thoroughly before reuse. (4) Discard the used acid by first reducing its strength to a neutral pH, diluting with at least 10 times as much water as acid.
How do I size a diffuser for my application?
We suggest sizing the diffuser based upon the gas flow rate going into it. The suggested flow for each diffuser is listed on the chart under "Suggested Flow". LPM = Liters Per Minute
California Regulatory Warning
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.
