Oxygen Concentrator - Reliant

The Reliant Oxygen Concentrator delivers up to 17 SCFH oxygen at delivery pressures up to 50 PSI. The Reliant produces oxygen from compressed air and is a microprocessor controlled oxygen concentrator. The Reliant is designed for easy transportation, with it's sturdy wheel base. These units have very low operating costs and are easy to operate and maintain.

Features

• Produces 17 SCFH oxygen at up to 50 PSI
• 58 decibals @ 1 meter
• Wheels attached for easy transportation
• Low operating costs
• Automatic and unattended operation
• Self-contained (internal air compressor)
• Microprocessor controlled
• Transportable design
• Easy to install and maintain
• Oxygen concentration monitor and alarm
• Optional auxiliary oxygen receiver (free standing)

More Information

More Information
Weight	175.0 lbs (74.4 kg)
Dimensions	22.5" x 24.5" x 27" (57.2 x 62.2 x 68.6 cm)
Warranty	1 Year
Max Pressure	50 PSI (3.52 Bar)
Oxygen Connection	1/4-inch NPT
Integrated Compressor	Yes
Oxygen Flow Rate	8 LPM (16.95 SCFH)

System Specifications
Performance Data:  Product Flow  Oxygen Delivery Pressure	17 SCFH 50 PSI (345 kPa)
Product Concentration	Up to 95%
Product Dew Point	-100°F (-73°C)
Dimensions (WxDxH)	22.5" x 24.5" x 36.25" (57.2 x 62.3 x 92.1 cm)
Weight	175 lbs (79 kg)
Physical Connections Product Gas Outlet	1/4" FNPT x 1/4 NPSM
Ambient Operating Conditions	Locate the oxygen concentrator system in a well-ventilated area that is protected from weather elements. Temps should remain between 40°F (4°C) and 112°F (44°C)
Control Power Requirements (Single Phase)	120 V ~ ± 10%, 60 Hz, 6.0 A 220 V ~ ± 10%, 50 Hz, 3.0 A
Sound Level	58 dBA @ 1 meter, open field conditions
Typical Power Consumption	680 W

 

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.