Product Overview

The UV-106-MH is a medium/high range ozone analyzer featuring ozone measurements up to 10,000 ppm with low range measurement of ozone down to 0.1 ppm. Bench mount ozone analyzer is compact and easy to use. The UV-106-MH can be purchased in either the bench mount or NEMA enclosure.

Integrated sample pump will pull a sample of ozone from your process or location into the analyzer and measure ozone in that gas stream. A UV lamp and receptor are used to determine the quantity of ozone in gas by determining the rate of ozone absorption by the UV lamp. This method of ozone detection will offer accurate detection of ozone at levels up to 10,000 without compromising low range detection below 1 ppm, while eliminating most cross-sensitivity from other gasses.

Features

Measurement based on UV absorption
Low power consumption; can be battery operated
Internal data logger with real time clock
On-board microprocessor with interactive menus includes data averaging options of 10 s, 1 m, 5 m and 1 hr
USB and RS-232 output of time/date, O3 concentration, internal temperature and pressure
Analog output (0-2.5 V and 4-20 mA) of ozone concentration in user selected units
Two level relay for control purposes (e.g., control of ozone source or turn warning light on and off)
Long-life pump (15,000 hr)

Optional Accessories	Description
Intake Filter Kit	PVDF Filter Housing 47 mm with 1/4" Fittings. Kit Includes: FHS (Filter Housing), and FPK-10 (Filters- Package of ten)
Portable B3 Battery	Add portability to your UV-106 Analyzer with the B3 Battery! This battery allows you to take your UV-106 Analyzer anywhere.
CUV-1 Carrying Case	This is an extremely rugged pelican case to carry your UV-106 in.

More Information
Weight	4.0000
Electrical	11 - 28 VDC nominally 500 mA at 12V, 6.0 watt
Dimensions	8.5 x 8.5 x 3.8 inches (21.6 x 21.6 x 9.5 cm)
Warranty	1 Year
Display	Digital
Detection Method	UV Absorption
Temperature Range	32 to 122°F (0.0 to 50°C)
Accuracy	Greater of 0.05 ppm or 2% of reading
Resolution	0.1 ppm
Supporting Documents	User manual and NIST traceable calibration sheet included.
Internal Datalogging	Yes, 32,736 Lines
Display Units	ppm
Comms. Protocol	RS-232, USB
Zero Drift	<0.1 ppm/day, <0.3 ppm/year
LPM Flow Rate	1 LPM
Relays	1
Integrated Pump	Yes
Portability	Yes, with purchase of B3 Battery

106MH Manual

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

Use in unoccupied spaces only.
Health hazard warning: emits ozone.

This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.