OMZ-950 : Small Ozone Generator

The OMZ-950 ozone generators are the most multipurpose ozone generator available today. They work in the car, in the house, the cottage, hotel room, boat, it can even work on a battery pack. The uses for this ozone generator are endless.

The OMZ-950 is a medium size ozone generator designed for use in a room or building up to approx. 5000 sq/ft for freshening the air, or shock treat up to about a 800 sq/ft area. This unit does have a variable control for adjusting the output. The output starts at approx. 10 mg/hr and goes up to 950 mg/hr.

More Information
Flow Rate	2,152.08 LPM (4,560 SCFH)
Supply Gas	Ambient Air
Ozone Output	950 mg/h
Weight	5 lbs.
Electrical	12 VDC
Dimensions	13" x 6.5" x 6.5" (33 x 16.5 x 16.5 cm)
Warranty	Manufactures Warranty 6 Years Ozone Solutions Warranty 1 Year
Flow Rate (CFM)	76 CFM
Shipping Weight	6 lbs.
Timer	No Timer
Upgradable	No
Controls	On / Off Rocker Switch, Variable Output
Generation Method	Corona Discharge
Maximum Continuous Use Area	3,500 ft2
Maximum Shock Treatment Area	200 ft2
Construction	High Grade 304 Stainless Steel Chassis. Corona Plate Is Made Of 316L Stainless Steel (highest grade) & Muscovite semi-flexible mica (excellent handling properties).
Maintenance	Under normal 24 hr/day use, the OMZ-950 ozone generator Mica Plate should be cleaned every 8-10 months using dish soap, water and a tooth brush. Cleaning frequency is highly dependent on the humidity level during use.

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.