This is a microprocessor-based gas sensor, designed for measuring high concentrations of ozone or oxygen in air with accuracy and dependability. The measurement principle is based on the absorption of UV light at 254nm. Readings are available in percent by weight, or grams/normal cubic meter. It's compact size allows for easy installation in process applications. Two detectors are used in this system, one for the ozone measurement, and the other to compensate for changes in UV lamp intensity. This unique design provides a sensor which will operate for extended periods without calibration or maintenance.
The API-452 also accepts a wide range of flow rates, from 0.5 - 5 LPM, allowing its use for a wide variety of applications.
Compact ozone process controller (12.3 in2 footprint)
Ranges from 0-5% to 0-20% w/w available
Temperature and pressure compensated
Units available in weight % or grams/Nm3
Available for high-purity applications
FM-6-2 Ozone Compatible Flowmeter
Designed for specifically for corrosive ozone gas flow-rates, this flow-meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical variable area meter.
ODS-1 Destruct Unit
This is an inexpensive ozone destruct unit, made for removing high concentrations of ozone efficiently.
5 x 2 x 7 inches (12.7 x 5.1 x 17.8 cm)
41 to 113°F (5 to 45°C)
+/- 1% of Full Scale
0.0 ppm (0.0 ppb)
User Manual & NIST Traceable Calibration Sheet Included
1% Full Scale / month (non-cumulative)
LPM Flow Rate
What is the maximum amount of tubing I can use to transport ozone to the analyzer?
30 feet of tubing would be the maximum length of tubing recommended.
452 Information Sheet
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.