The API-465L UV Photometric Ozone Monitor is perfect for low ozone level measuring, and is extremely stable. It is NIST traceable calibrated and contains pressure and temperature compensation technology to ensure that it reads accurately under any condition. The wall-mount version is in a NEMA enclosure and is extremely hardy. The rack-mount version is a good choice for including in systems.
The API-465L can be configured to measure any range of ozone up to 500ppm. If you are going to be measuring low concentrations of ozone, it's important to set the sensor to measure lower levels of ozone (i.e. 0-1ppm).
Features
Lower detectable limit of 3 ppb ozone
Programmable relay contacts
Built-in diagnostics
Fast response times
Optional Accessories
Description
Ethernet
Communication protocol allowing for connections to a wide variety of devices and networks.
Sample Conditioner
The Sample Conditioner option is a water drop-out filter and a permeation gas dryer, designed for high-humidity environments.
6 Channel Option
This option allows the M465L to measure ozone at up to six different sampling points by using an internal stream selector. 3 or 6 channel stream selectors are available.
3 Channel Option
This option allows the M465L to measure ozone at up to six different sampling points by using an internal stream selector. 3 or 6 channel stream selectors are available.
Intake Filter Kit
PVDF Filter Housing 47 mm with 1/4" Fittings. Kit Includes: FHS (Filter Housing), and FPK-10 (Filters- Package of ten)
What is the maximum amount of tubing I can use to transport ozone to the analyzer?
30 feet of tubing would be the maximum length of tubing recommended.
Are Multi-Channel variations of the 465L available?
Yes, the API-465L is available in optional 3-channel and 6-channel configurations as well. Contact the Ozone Solutions Monitor department for pricing!
465L Manual
465L Information Sheet
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
Use in unoccupied spaces only.
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.
