Product Overview
The AS-D is a cost effective method of providing oxygen at pressures up to 90 PSIG. Oxygen Concentrators eliminate the expense, inconvenience, hazardous handling, and storage problems associated with purchased liquid or high pressure oxygen.
Industrial design uses steel zeolite towers and rebuildable solenoid valves for a easy to maintain system that will never wear out or become obsolete.
Contact Ozone Solutions for details on what may be best for your application.
Features
- Produces 90 SCFH oxygen at up to 65 PSI
- Produces Oxygen from Compressed Air
- Microprocessor Controlled
- Low Operating Cost
- Automatic Unattended Operation
- Easy to install and maintain
| More Information | |
|---|---|
| Weight | 338.0 lbs (153.3 kg) |
| Dimensions | 16 x 20 x 50 inches (40.6 x 50.8 x 127 cm) |
| Warranty | 1 Years |
| Max Pressure | 65 PSI (4.57 Bar) Max O2 outlet pressure |
| Oxygen Connection | 1/4-inch NPT |
| Inlet/Outlet Connections | 3/8-inch NPT |
| Integrated Compressor | No 18 CFM @ 90 PSI required |
| Oxygen Flow Rate | 42.48 LPM (90 SCFH) |
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.