Series B12 transmitters are loop powered instruments that transmit a 4 to 20 mA signal linearly proportional to gas concentration. The system is operated from a 24 VDC power supply, and sufficient for most monitoring applications.
Alternatively, the unit can operate at 12 VDC, with a reduced output load for applications requiring battery operation.
External Display options for the B12 Monitor. (NEMA 4X only)
B12 Calbiration Kit
Use the A-23-14 Calibration Kit to calibrate your sensor. (NEMA 4X only)
Ozone Sensors Available
Loop powered 4 to 20ma transmitter
Easily integrated into existing control system
Great addition to your data acquisition system
Consider: Wall Mount: LCD optional: Simple Trasmitter: Nema 4x
12 - 30 VDC
4" x 4" x 2" (10.2 x 10.2 x 5.1 cm)
-22 to 131°F (-30 to 55°C)
0.01 ppm (10 ppb)
User Many and NIST Traceable Calibration Sheet included.
0 to 99%
Generally ±5% of value, but limited by available calibration gas accuracy:
Sensor dependent, but generally less than 1% of full scale per month, non-cumulative
Application dependent, but generally less than 3% per month
Loop-powered 4-20 mA, 750 ohms maximum at 24 VDC
None. Optional LCD display available
NEMA 4X Polystyrene Explosion-proof cast iron optional, Class 1, Div. 1, Groups B, C, & D.
Zero and span potentiometers mounted on transmitter circuit board
-30º to +55º C (except oxygen, which is -10º to +55º C)
7-30 PSIA (0.5-2 Bar)
Specfications for Sensor Ranges
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered.
Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.