The ES-600 Ozone Monitor is designed for accuracy, ease of installation, versatility and serviceability. This systems comes with the Sensor and Monitor Base. A remote-mount sensor lets you mount the base in a convenient location, even while monitoring dangerous or hard-to-reach places elsewhere. The LCD and front-panel controls make setup and operation easy. The SM-EC sensor chip is inexpensive and field-replaceable.
Monitor Quick Comparison: Portable: No Optional Sensor Ranges: 0.01-20.00 or 1-50 ppm Display: LCD Alarm: Audible & Visual Outputs: Yes Data-logging: No Indoor/Outdoor: Indoor
SL-1 Safety Light
Light Tower 2 Tier Red/Green 24VAC/DC Direct Mount
AL-1 Audible Alarm
Audible alarm to be used in conjunction with the ES-600 monitor.
EE-2 Protective Sensor Enclosure
Complete enclosure (intended as water-resistant enclosure) Includes power supply, connector, and fan.
International Plug Adapter
220V/50Hz Power Option necessary for overseas use.
DL-SC-3 Datalogger and Software
Ecosensors data logging data cable bundle and ecosensors datalogging software for RS-232 transmitting SMX/SM-EC sensors
+/- 10% (The greater of +/- 10% of reading, or +/- 0.03 PPM)
0.01 ppm (10 ppb)
User Manual and NIST Traceable Calibration Sheet included
Audible and Visual : Optional 24V Strobe and Buzzer available
0 to 80%
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered.
Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY.
Use in unoccupied spaces only.
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.