AV-88 - Monitor

Thermo Scientific

Write a Review
California Regulatory Information


Pricing: Call for Price Today at 888.892.0303

SKU: AV88GBOC1

Condition:
New

Product Overview

Thermo Scientific

AquaSensors AV88 Ozone Meter has the ability to measure Ozone (03) gases directly, once added into a Stainless TEE piping piece. The Meter can be exposed upto water pressures up to 65 psi. 

AV88 Ozone Meter Features

  • 0-10.00 ppm range -Measure ozone accurately up to 10 ppm with 0.01 ppm resolution
  • High pressure sensor-Sensor capable of operating under pressure up to 65 PSI
  • Simple install in process - Sensor can be placed directly into a piping system with no flowcell required. 
  • Clear Display - Back-lit LCD display provides clear visibility in any lighting conditions
 More Information
 Sensor Type
Polargraphic Sensor with replacement membrane cap
 Range 0-10.00 ppm
 Response Time 90% in 90 seconds
 Accuracy 2% of full scale
 Max Pressure 65 PSI
 Resolutions 0.01 ppm
 Analog Output Two 4020 mA outputs
 Enslosure Universial 1/4 DIN
 Weight 0.5 lbs.
 Sensor Material PEEK
 Sensor Electorde Clark cell, gold cathode, silver anode, silver reference
 Membrane cap PFA Teflon
 O-rings Viton
 Approval  Meets CE requirements for heavy industrial use
 Sensor Cable 10 ft. standard, optional 20 or 30 ft. cable lengths
 Sample Temp 0-50° C
 Warranty 1 year
 Calibration On site using
Less Than or Equal To: 2 ppm Every 6 Months
Greater Than: 2 ppm Every Month
  AV-88 Information
AV-88 Information
 
 AV-88 Manual

AV-88 Manual

 

 

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.