This is an inexpensive unit, with a corona tube and an air pump, in a plastic case. The air pump can deliver 0.75 PSI of pressure, and deliver approximately 2-3 LPM of flow. This system can output 100mg/h without an air drier, and 200mg/h with an air drier. This product includes tubing & diffuser stones.
What makes the HP-200 different
This is a cost effective method to try ozone and see if it's right for you.
Compact design with built in air pump
Ready to use upon delivery
Pump can push up to .5 meters of water depth
Ozone tubing & diffuser stone included
Washing fruits and vegetables at home
Ozonated olive oil
Aquarium or small aquaculture application
Spa water treatment
0.0 LPM (0.0 SCFH)
Concentration at Rated Flow
Max Operating Pressure
0.75 PSI (0.05 Bar)
Adjustable Ozone Output Dial
Medium Frequency 100 - 2,000 Hz
3/16-in Barb Connection
0.2 grams/hour (200 mg/hour)
120 VAC 60 Hz 7 Watts,
5.6 x 4 x 2 inches (14.2 x 10.2 x 5.1 cm)
3 LPM (6.36 SCFH)
Call for Availability
On / Off Rocker Switch, Variable Output
0.0 LPM (0.0 SCFH)
Maximum Continuous Use Area
Maximum Shock Treatment Area
0.0 to 3 PSI (0.0 to 0.21 Bar)
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.