HP-500: Low cost ozone generator with air pump

$168.00
SKU:
HP-500 (120V/60Hz)
Condition:
New
Click here to zoom

Product Overview

Ozone Solutions

This is an affordable unit, with a corona tube & an air pump, in a plastic case. The air pump can deliver 0.75 PSI of pressure, and deliver approximately 1-2 LPM of flow. This system can output 200mg/h without an air drier, and 500mg/h with an air drier. 

What makes the HP-500 different

This product comes complete with an air dryer, a built in air pump, tubing and air diffusers. It features an adjustable incremental timer with a constant ON setting, and adjustable ozone outputs.

Features

  • Digital, incremental (adjustable) timer with an ON setting
  • Adjustable ozone output
  • Internal air pump can push up to .5 meters of water depth
  • Ozone tubing, air dryer, & diffuser stones are included
 
More Information
Concentration at Rated Flow 0.10%
Max Operating Pressure 0.75 PSI (0.05 Bar)
Supply Gas Ambient Air
Adjustable Ozone Output Dial Yes
Cooling Air Cooled
Corona Cell Materials Stainless Steel with Glass/Quarts Dielectric
Flowmeter No
Pressure Gauge No
Operating Frequency Medium Frequency 100 - 2,000 Hz
Ozone/Oxygen Connections 3/16-in Barb Connection
Ozone Output 0.5 grams/hour (500 mg/hour)
Weight 3.0000
Electrical 120 VAC 60 Hz 10 Watts,
Dimensions 8.5 x 4.5 x 2.2 inches (21.5 x 11.5 x 5.5 cm)
Warranty 1 Years
Rated Flow 2 LPM (4.24 SCFH)
In Stock In Stock
Operating Pressure 0.0 to 3 PSI (0.0 to 0.21 Bar)

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.