HESS L-100 - Ozone Injection System - High Flow

Hess Machine Ozone Generators were designed for use in the bottled water industry. These ozone generators produce ozone from dry air with an integrated air dryer; meaning only compressed air, electricity and cooling water are required for operation. These are the most reliable and robust ozone generators in production today.

Features

• 19 g/hr Ozone from 60 SCFH of Dry Air at 1% by weight
• Ozone generated from dry air with integrated air dryer
• Water cooled ozone generator
• Line frequency ozone generator provides extremely reliable operation
• Adjustable Output

More Information
Concentration at Rated Flow	1%
Max Operating Pressure	15 PSI (1.05 Bar)
Supply Gas	Dry Air
Adjustable Ozone Output Dial	Yes
Cooling	Water Cooled
Corona Cell Materials	Stainless Steel with Glass/Quarts Dielectric
Flowmeter	Yes
Pressure Gauge	Yes
Operating Frequency	Line Frequency 50/60 Hz
Ozone/Oxygen Connections	1/4" Female NPT Connections
Weight	260.0000
Electrical	120 VAC 50/60 Hz (220V/50Hz Available)
Dimensions	60 x 28 x 44.5 inches (152.4 x 71.1 x 113 cm)
Warranty	1 Year
Rated Flow	28.32 LPM (60 SCFH)
Shipping Weight	470 lbs.
Air Dryer Type	Desiccant - Pressure Swing Absorption
Operating Pressure	10 to 13 PSI (0.7 to 0.91 Bar)

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.