The OX-30 Oxygen Concentrator is a compact unit that is easy to operate and service. This unit produces up to 30 SCFH oxygen at delivery pressures up to 7 PSI from 7 CFM of compressed air.
This unit has feet for sitting on the floor or bench but also comes with Wall mount tabs for easy hanging. The OX-30 uses the Sequal ATF 15 modules for oxygen concentration. The ATF modules offer the smoothest and most consistant oxygen source of any packaged oxygen concentrators.
The OX-30 includes the following features:
Incoming air pressure regulator
Incoming air pressure gauge
Incoming air solenoid valve
5-micron coalescing air filter
01-micron air filter
Oxygen pressure gauge
Oxygen flow meter
Oxygen flow regulating valve
Produces 30 SCFH oxygen at up to 7 PSI
Wall Mount tabs for easy installation
Cost effective design
Enclosed unit to protect all components
Integrated flow meter with regulating valve
65.0 lbs (29.5 kg)
12 x 24 x 24 inches (30.5 x 61 x 61 cm)
7 PSI (0.49 Bar)
No 7 CFM @ 20 PSI required
Oxygen Flow Rate
14.16 LPM (30 SCFH)
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.