Tubing - Porous PTFE - Ozone Compatible

Porous PTFE Tubing is the best tubing available for the plumbing of ozone gas. This tubing is completely ozone resistant, can handle high temperatures and is flexible. Ozone Solutions stocks this tubing for our use when building ozone systems and also offers this tubing for sale. Tubing is normally in stock and can ship in 10 foot incremental lengths..  

Porous PTFE is premium tubing due to its outstanding flexability and durability. It is said that PTFE exhibits a combination of mechanical, electrical, chemical temperature and friction resistant properties unmatched by any other substrate. Porous PTFE Tubes are excellent for use in extreme heat up to +500° F (260° C) and resistant to a low end temperature of -328° (-200° C).  PTFE is used in applications where other plastics break down due to their inability to be resistant to chemicals and heat. Porous PTFE has the same unique properties as “normal” PTFE.

Porous PTFE tubing is best used with Kynar Fittings which are specially designed to create a tight seal around plastic tubing. . These fittings come in a variety of sizes and specifications and are resistant to abrasion and corrosion.

Key properties of Porous PTFE

• Microporous - Air Permeable - Soft & Flexible - Biocompatible
• Chemically Resistant - High Linear Strength - Implantable - Chemically Inert
• Low Dielectric Constant - Excellent Radial Expansion - Excellent UV Resistance - USP Class VI Resin
• Low Coefficient of Friction - Watertight (Low Pressure) - Hydrophobic

Properties
Wall Tolerance +/-	0.0006 - inch
OD Tolerance +/-	0.001 - inch
Burst Pressure @ 75-deg F	840 PSI
Tensile Strength, 73-deg F	3500 PSI
Elongation, 73-deg F	300%
Yield Strength	1740 PSI
Melting Point	620 Deg F
Thermal Conductivity	1.7 Btu·in/h·ft2·°F
Service Temperature	-454 to 500 Deg F
O2 Permeability	637 Ng cm m-2

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 6 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.