Product Overview
The Sensafe Ozone Test Strips are a low-cost, fast method of determining levels of dissolved ozone in water up to 0.5 ppm. They do not utilize any glass vials, which makes them ideal for many food and water facilities. 50 test strips per pack.
Features
- Lowest cost dissolved ozone detection.
- Ready to use upon arrival
- Easy-to-distinguish colors
- Accurate
- Small size for easy portability
How do I use the kit?
Dip one test strip into a 50mL or larger water sample with constant, gentle back-and-forth motion for 10 seconds. Remove the strip, shake once, briskly, to remove excess water and wait 20 seconds. Then, view through the aperture to match with the closest color. The simple dip-and-read procedure makes testing easy, as no technical experience is required to run the test
| More Information | |
|---|---|
| Weight | 0.2500 |
| Electrical | 120 - 240 VAC 60 Hz |
| Dimensions | Length: 3.3 in (8.3 cm) Diameter: 1.5 in (3.8 cm) |
| Warranty | 1 Years |
| Display | None |
| Detection Method | TMK Indicator with Iodide Salt |
| Temperature Range | 32 to 212°F (0.0 to 100°C) |
| Accuracy | +/- 100% |
| Resolution | 0.1 ppm (100 ppb) |
| Supporting Documents | Instructions included (on bottle). |
| Min Detect Limit | 0.1 ppm (100 ppb) |
| Internal Datalogging | No |
| Display Units | ppm |
| Communication Protocol | None |
| Relays | 0 |
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 6 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.