WIS-300 - Ozone Injection System

This ozone generation and injection system is designed to quickly integrate into an existing water line. The WIS system can produce, and introduce, 300 g/hr of ozone into 300 GPM of water flow. The WIS Ozone Injection systems offer a turn-key ozone system with reliability and performance you can trust. 

This system includes a temperature sensor to keep the generator safe, a built in clock to display Ozone Generator run time, a water flow switch to stop and start the system based on water flow, and an Ozone Destruct Unit to destroy all undissolved ozone from the contact tank.

What makes the WIS-300 different?

The WIS systems contain a Water Cooled Ozone Generator, so an integrated Water Chiller is included on the skid.

Equipment	Description
Dissolved Ozone Monitor	Monitors and control ozone level in the water (in ppm)
ORP Monitor	Monitors ORP level in water, will also control ozone level with indirect reading
Remote Ambient Ozone Sensor	Monitor ozone levels near water point of use for safety purposes

Features

• Can introduce 300 g/hr ozone into 300 GPM water flows
• Produces ozone from integrated Oxygen Concentrator
• Automatic operation - one touch start up and shut down
• Customizable system can be configured for your specific application
• High efficiency with excellent mass transfer of ozone

More Information
Adjustable Ozone Output Dial	Yes
Cooling	Water Cooled
Flowmeter	Yes
Pressure Gauge	Yes
Ozone Output	300,000 mg/h (300 g/h)
Weight	1.7500
Electrical	220 VAC 50 Hz
Dimensions	70 x 50 x 85 inches (177.8 x 127 x 215.9 cm)
Warranty	1 Year
Materials Wetted	Kynar, Stainless Steel, Viton®
Max Water Flowrate	300 GPM
Contact Tank Size	140 Gallons
Mounting Style	Skid Mounted
Max Water Pressure	100 PSI (7.03 Bar)
Oxygen Production	42.48 LPM (90 SCFH)
Operating Water Pressure	50 PSI (3.52 Bar)
Water Connections	Inlet and Outlet will be 1.5-in Female NPT connections
Water Flowrate @ 2.0ppm	300 GPM
Water Flowrate @ 4.0ppm	150 GPM

 

 

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.

Videos Hide Videos Show Videos

• 

  Ozone Solutions Ozone Water Injection System Ozone Solutions Ozone Injection Project

  Ozone Solutions Ozone Injections into water system