Product Overview
WIS-150
This ozone generation and injection system is designed to quickly integrate into an existing water line. The WIS system can produce, and introduce, 150 g/hr of ozone into 200 GPM of water flow. The WIS Ozone Injection systems offer a turn-key ozone system with reliability and performance you can trust.
This system includes a temperature sensor to keep the generator safe, a built in clock to display Ozone Generator run time, a water flow switch to stop and start the system based on water flow, and an Ozone Destruct Unit to destroy all undissolved ozone from the contact tank.
What makes the WIS-150 different?
The WIS systems contain a Water Cooled Ozone Generator, so an integrated Water Chiller is included on the skid.
| Optional Equipment | |
| Equipment | Description |
|---|---|
| Dissolved Ozone Monitor | Monitors and control ozone level in the water (in ppm) |
| ORP Monitor | Monitors ORP level in water, will also control ozone level with indirect reading |
| Remote Ambient Ozone Sensor | Monitor ozone levels near water point of use for safety purposes |
Features
- Can introduce 150 grams/hour ozone into 300 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Automatic operation - one touch start up and shut down
- Customizable system can be configured for your specific application
- High efficiency with excellent mass transfer of ozone
More Information
| Adjustable Ozone Output Dial | Yes |
|---|---|
| Cooling | Water Cooled |
| Flowmeter | Yes |
| Pressure Gauge | Yes |
| Ozone Output | 150,000 mg/h (150 g/h) |
| Weight | 1.0000 |
| Electrical | 230 VAC 50 Hz |
| Dimensions | 73 x 34 x 72 inches (185.4 x 86.4 x 182.9 cm) |
| Warranty | 1 Years |
| Materials Wetted | Kynar, Stainless Steel, Viton® |
| Max Water Flowrate | 300 GPM |
| Contact Tank Size | 140 Gallons |
| Mounting Style | Skid Mounted |
| Max Water Pressure | 100 PSI (7.03 Bar) |
| Oxygen Production | 47.19 LPM (100 SCFH) |
| Operating Water Pressure | 50 PSI (3.52 Bar) |
| Water Connections | Inlet and Outlet will be 1.5-in Female NPT connections |
| Water Flowrate @ 2.0ppm | 300 GPM |
| Water Flowrate @ 4.0ppm | 150 GPM |
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
Use in unoccupied spaces only.
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.
