Product Overview
This enclosure mounted, ozone injection system is designed to quickly integrate into an existing water line. This Waterzone system produces and introduces 120 g/hr of ozone into water. The WSE series offers turn-key ozone systems, with reliability and performance you can trust, in an enclosure for harsh environments. System safety and controls are installed for automated ozone production and injection.
|
Safety Sensors and Controls
|
|
| Water Flow Switch | Ensures adequate water flow |
| Dissolved Ozone Monitor | Monitors and controls the ozone level |
| ORP Monitor | Monitors ORP level in water, will also control ozone level with indirect reading |
| Remote Ambient Ozone Sensor | Monitor ozone levels near water point of use for safety purposes |
| Temperature Sensor | Monitors ambient temperature to keep ozone generator safe (necessary if internal compressor is used) |
| Hour Meter | Displays Ozone generator run time |
| Ozone Destruct Unit | Will destroy all undissolved ozone from contact tank and includes water trap |
| Nema 4x Enclosure | Stainless Steel Enclosure for protection in harsh environments |
Features
- Introduces 120 grams/hour of ozone into water
- Enclosure mounted to withstand harsh environments
- Will provide 70 GPM Water Flow with 7.6 PPM Dissolved Ozone Level
- Will provide 35 GPM Water Flow with 15.1 PPM Dissolved Ozone Level
- Turnkey system is easy to setup and put into use for many applications
- Dissolved ozone level is measured and recorded
|
More Information
|
|
|---|---|
| Adjustable Ozone Output Dial | No |
| Cooling | Air Cooled |
| Flowmeter | Yes |
| Pressure Gauge | Yes |
| Ozone Output | 120,000 mg/h (120 g/h) |
| Weight | 850.0000 |
| Electrical | 220 VAC 50 Hz |
| Dimensions | 60 x 25 x 66 inches (152.4 x 63.5 x 167.6 cm) |
| Warranty | 1 Years |
| Materials Wetted | Kynar, Stainless Steel, Viton® |
| Max Water Flowrate | 70 GPM |
| Contact Tank Size | 25 Gallons |
| Mounting Style | Protective Enclosure |
| Max Water Pressure | 100 PSI (7.03 Bar) |
| Oxygen Production | 20 LPM (42.38 SCFH) |
| Operating Water Pressure | 50 PSI (3.52 Bar) |
| Water Connections | Inlet and Outlet will be 1 1/2-in Sanitary connections |
| Water Flowrate @ 2.0ppm | 140 GPM |
| Water Flowrate @ 4.0ppm | 70 GPM |
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
