AC-500GE - Ozone Generator


Write a Review
California Regulatory Information

Product Overview

AC-500GE Ozone Generator

The AC-500GE is perfect for research & lab applications where pure oxygen/ozone gas is required. This ozone generator uses all PTFE and quartz materials. The oxygen feed gas will never touch any metal surfaces, allowing for the purest gas stream possible. With two connections, it ensures a simple and quick setup. It is usable upon installation, and as easy to use as a light switch.

What makes the AC-500GE different?

The AC-500GE uses a double quartz dielectric. This ensures the oxygen and ozone will never contact stainless steel, or other materials that can cause contamination.

The AC-500GE is tuned for high concentrations of ozone, at very low flow rates of oxygen. This makes the AC-500GE a perfect lab or testing ozone generator for many applications.


  • 500-750 mg/hr ozone production on oxygen
  • 250 mg/hr ozone production on dry air
  • Double Quartz corona cell for pure ozone generation
  • 1/4-in Kynar barb connections for oxygen input and ozone output
  • Air cooled, wall mounted or benchtop ozone generator
  • Compact size fits in almost any area
  • Simple use and installation, only electrical power and gas connections necessary
 More Information
 Concentration at Rated Flow 0.10%
 Max Operating Pressure 5 PSI (0.35 Bar)
 Supply Gas Dry Air or Oxygen
 Adjustable Ozone Output Dial Yes
 Cooling Air Cooled
 Corona Cell Materials Double Glass, no metal parts
 Flowmeter No
 Pressure Gauge No
 Ozone Production Oxygen 500-750 mg/hr ozone production on oxygen
 Ozone Production Dry Air 250 mg/hr ozone production on dry air
 Ozone Output 1 grams/hour
 Weight 7.0 lbs
 Electrical 120 VAC 60 Hz (220v is an option)
 Dimensions 11" x 6" x 4" (HxWxD) 28 x 15 x 10-cm
 Warranty 1 Year
 Rated Flow 1 LPM (2.12 SCFH)
 In Stock Call for Availability
 Operating Pressure 0.0 to 5 PSI (0.0 to 0.35 Bar)

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.