Nano - Ozone Generator

The Nano Ozone Generator is capable of producing ozone at up to 9% by weight, at 1 LPM of oxygen flow. This compact, easy to use ozone generator is perfect for a lab setup or any application where a high concentration of ozone is necessary at a low flow rate of oxygen. 

This is a great bench-top ozone generator that is small and easy to use. This is also the lowest cost ozone generator that produces ozone at concentrations up to 9% by weight. 

The Nano ozone generator provides high concentrations of ozone at low oxygen flow rates. At a flow rate of 1 LPM the Nano produces 9% by weight of ozone. This is the perfect ozone generator for laboratory, or other, applications where efficient ozone generation is necessary.

Materials of Constructions

• Enclosure: Brushed Stainless Steel/Aluminum
• High Precision Machined Ozone Generator Cell tested at up to 150 PSIG for leaks
• O3/O2 Gas Tubing: PTFE/304 Stainless Steel/Brass

Applications

• Killing Bacteria and Viruses
• Smoke Removal
• Sanitation for Buses, Ambulances, Fire Trucks or Subways
• Sanitation for Hotel Rooms, Industrial or Commercial Offices

Features

• 13.51 g/hr Ozone from 3 LPM Oxygen at 6.3% by weight
• Ozone produced at up to 9% by weight
• Does not feature a potentiometer
• Air cooled bench top ozone generator
• High concentration of ozone at low oxygen flow rates
• Standard working pressure of 20 PSI

More Information
Concentration at Rated Flow	5.64%
Max Operating Pressure	50 PSI (3.52 Bar)
Supply Gas	Oxygen
Adjustable Ozone Output Dial	No
Cooling	Air Cooled
Corona Cell Materials	Aluminum with Ceramic Dielectric
Flowmeter	No
Pressure Gauge	No
Operating Frequency	High Frequency 5,000 - 30,000 Hz
Ozone/Oxygen Connections	1/4-inch Compression Fittings
Ozone Output	15 grams/hour (0.79 lbs/day)
Weight	12.5000
Electrical	120 VAC 60 Hz
Dimensions	5 x 5 x 14 inches (12.7 x 12.7 x 35.6 cm)
Warranty	Ozone Solutions Warranty: 1 Years Manufacturer Warranty: 3 Years
Rated Flow	3 LPM (6.36 SCFH)
Operating Pressure	10 to 50 PSI (0.7 to 3.52 Bar)
Nano Manual

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.