Product Overview
The AquaPro Multi-Input Process Analyzer has everything you need to measure and control dissolved ozone levels as well as pH/ORP, conductivity, dissolved oxygen, free chlorine, turbidity and suspended solids.
Features
- Large color display
- Up to four sensor inputs
- Up to eight current outputs
- Up to Six alarm/control relays
- Seven user-selectable languages
| More Information | |
|---|---|
| Weight | 3.0000 |
| Electrical | 120 - 240 VAC 60 Hz |
| Dimensions | 6.8 x 3.8 x 5.7 inches (17.3 x 9.7 x 14.5 cm) |
| Warranty | 1 Years |
| Display | Digital |
| Detection Method | Amperometric |
| Temperature Range | -4 to 140°F (-20 to 60°C) |
| Accuracy | +/- 1% |
| Resolution | 0.01 ppm (10 ppb) |
| Min Detect Limit | 0.1 ppm (100 ppb) |
| Internal Datalogging | yes |
| Display Units | ppm |
| Communication Protocol | None |
| Relays | 3 |
Applications
- High-Purity Applications to Wastewater Effluent
- Rugged Industrial Environments
- Process Optimization and Control Applications
Configurations available for purchase on line soon:
- AP7777K 4 input RDO (Luminescent/Optical DO) – ideal for waste water applications
- AP77XXK 2 input RDO (Luminescent/Optical DO) – ideal for waste water applications
- AP6XXXK Ozone – ideal for water disinfection applications
- AP33XXK 2 input Contacting Conductivity – various applications such as boiler water and RO water treatment.
- AP11XXK 2 input pH – various applications such as boiler water, petrochemical, metal refining and effluent.
| Aqua Pro Manual | Aquo Pro Information Sheet |
 |
|
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.