The DR-10 PLUS is an extremely-powerful, commercial-grade ozone generator for remediation and disaster restoration work. Its lightweight and compact design make it easy to take into and out of different rooms. It's high frequency generation technology ensures maximum ozone output with high humidity. After ozone treatment, the unit destroys ozone present in ambient air at high flow rates. This high-flow destruct unit provides a quick turnaround time allowing rooms to be occupied more quickly. This device can significantly improve your work efficiency. Available for purchase or rent.
Features
Designed for expeditious turnaround treatment
10 grams/hour (10,000 mg / hr) Ozone Production from Corona Discharge
Touchscreen interface to change treatment time
Low maintenance
Works well in high humidity environment
High-flow fans
Plug and play operation
Specifications
Ozone Output 10,000 mg/h (10 g/h)
Electrical 120 VAC 60 Hz 2.5 A
Generation Method Corona Discharge
Continuous Use - Not for use in continuously in occupied areas
Dimensions 23.25 x 12 x 18 inches
Weight 75 lbs.
Fan Output 120 CFM
Maintenance Clean - corona tubes as needed with a dry cloth. Typically once a quarter for dirty environments and once a year for clean environments.
Applications
Killing Bacteria and Viruses
Smoke Removal
Sanitation for Buses, Ambulances, Fire Trucks or Subways
Sanitation for Hotel Rooms, Industrial or Commercial Offices
More Information
Electrical
120 VAC 60 Hz 2.5 A
Generation Method
Corona Discharge
Continuous Use
Do not use continuously in occupied areas
Ozone Production
10 grams/hr
Supply Gas
Ambient Air
Dimensions
23.25 x 12 x 18 inches
Weight
75 lbs.
Warranty
1 year
DR Series
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.