Product Overview
The HG-1500 is a great ozone generator for small scale applications, or short term laboratory testing. This ozone generator is flexible, allowing for oxygen or dry air feedgas, and includes a potentiometer to adjust ozone output.
What makes the HG-1500 different
The HG-1500 is a low cost ozone generator with the features of a more expensive unit. However, outside the warranty period, we cannot offer any service for the HG-1500, because we carry no spare parts for the system, and cannot repair these ozone generators. Despite this inconvenience, we offer to replace the system if it fails within the warranty period.
Features
- Up to 1.5 gram/hour ozone production
- Can operate on oxygen or dry air feedgas
- Ozone output fully adjustable with integrated potentiometer
- Small and compact for tight spaces
- Inexpensive ozone generator is perfect for small scale applications
| More Information | |
|---|---|
| Concentration at Rated Flow | 0.60% |
| Max Operating Pressure | 5 PSI (0.35 Bar) |
| Supply Gas | Dry Air or Oxygen |
| Adjustable Ozone Output Dial | Yes |
| Cooling | Air Cooled |
| Corona Cell Materials | Stainless Steel with Glass/Quarts Dielectric |
| Flowmeter | No |
| Pressure Gauge | No |
| Operating Frequency | Medium Frequency 100 - 2,000 Hz |
| Ozone/Oxygen Connections | 1/4-inch barbed connections |
| Ozone Output | 1.5 grams/hour (1,500 mg/hour) |
| Weight | 2.2500 |
| Electrical | 120 VAC 50/60 Hz |
| Dimensions | 10 x 7 x 5.5 inches (25.4 x 17.8 x 14 cm) |
| Warranty | 1 Years |
| Rated Flow | 3 LPM (6.36 SCFH) |
| In Stock | In Stock |
| Operating Pressure | 0.0 to 5 PSI (0.0 to 0.35 Bar) |
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.