Total Generator (TG)-150 gram/hr - Ozone Generator

Ozone Solutions

Write a Review

Call for Price Today at 888.892.0303

California Regulatory Information
SKU:
7907
Condition:
New
Height:
7"
Width:
17"
Depth:
19"
Weight:
90 lbs.
Mount:
Rack Mount

Product Overview

Ozone Solutions

The TG-150 is a compact, water cooled ozone generator that can produce high levels of ozone production with very little oxygen. When factoring in the cost of oxygen feed gas, the TG-150 is a very inexpensive option to produce ozone for your application.

The TG-150 is capable of producing 150 grams/hour of ozone from only 30 LPM of oxygen at 5.8% by weight. Used with a common 64 SCFH (30 LPM) oxygen contractor, the TG-150 will produce 150 g/hr of ozone at 5.8% by weight.

System Information

  • 150 g/hr Ozone from 30 LPM of Oxygen at 5.8% by weight
  • 120 g/hr Ozone from 20 LPM of Oxygen at 8.2% by weight
  • Water cooled Ozone Generator
  • Adjustable Ozone Output From 0-100%, integrated oxygen flow meter and pressure gauge
  • Efficient ozone generator, low oxygen demand for ozone output, Simple operation, no confusing interface
  • Stainless Steel Enclosure
 
 More Information
 Concentration at Rated Flow
5.80%
 Operating Pressure
0.0 to 80 PSI (0.0 to 5.62 Bar)
 Max Operating Pressure
80 PSI (5.62 Bar)
 Supply Gas
Oxygen
 Adjustable Ozone Output Dial
Yes
 Cooling
Water Cooled
 Ozone Production Method
Corona Discharge
 Flowmeter
Yes
 Pressure Gauge
Yes
 Operating Frequency
High Frequency 5,000 - 30,000 Hz
 Ozone/Oxygen Connections
3/8-in Compression Stainless Steel Inlet - Ozone/Oxygen Connections 1/2-inch Brass Female NPT - Water Connections
 Ozone Output 
150 g/hr.
 Weight
105.0 lbs.
 Electrical
220 VAC 60 Hz 1200 Watts
 Dimensions
13" x 24" x 24"
 Warranty
None-Rental
 Rated Flow
30 LPM (63.6 SCFH)
 
 
Total Generator Information
Total Generator Information
 

 

 

Warranty Information

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.

California Regulatory Warning

All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.