Product Overview
The TG-20 is a very efficient ozone generator, producing 20 g/hr ozone from only 5 LPM oxygen. The TG-20 is a microprocessor controlled, ozone generator that will operate under almost any pressure and flow, while tuning itself for optimum performance.
System Information
- 20 g/hr Ozone from 5 LPM of Oxygen at 5% by weight
- Adjustable Ozone Output From 0-100%
- Air Cooled, Rack Mountable Ozone Generator
- Optional Pressure Gauge and Flow Meter
- Efficient ozone production with low operating costs
- Quick setup to save time
- Low Oxygen demand for ozone output
| More Information | |
| Concentration at Rated Flow | 5% |
| Standard Operating Pressure | 0.0 to 80 PSI (0.0 to 5.62 Bar) |
| Max Operating Pressure | 80 PSI (5.62 Bar) |
| Supply Gas | Oxygen |
| Adjustable Ozone Output Dial | Yes |
| Cooling | Air Cooled |
| Ozone Production Method | Corona Discharge |
| Operating Frequency | High Frequency 5,000 - 30,000 Hz |
| Ozone/Oxygen Connections | 1/4" Stainless Steel Compression |
| Ozone Output G/HR | 20 g/hr. |
| Dimensions | 19" x 17" x 7" |
| Weight | 23.0 lbs. |
| Warranty | 1 Years |
| Rated Flow |
5 LPM (10.59 SCFH)
|
|
|
|
| Total Generator Information |
|
|---|---|
 |
|
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered.
Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.