Product Overview
The TG-300 is a compact, water cooled ozone generator that can produce high levels of ozone production with very little oxygen. When factoring in the cost of oxygen feed gas, the TG-300 is a very inexpensive option to produce ozone for your application.
The TG-300 is capable of producing 300 g/hr of ozone, from 60 LPM of oxygen at 5.8% by weight. This generator can also produce 140 g/hr of ozone, from only 30 LPM of oxygen at 8.2% by weight. The TG-300 can be mounted on a wall, or used on a shelf, for simple operation.
System Information
- 300 g/hr Ozone from 60 LPM of Oxygen at 5.8% by weight
- 140 g/hr Ozone from 20 LPM of Oxygen at 8.2% by weight
- Water cooled Ozone Generator
- Adjustable Ozone Output From 0-100%
- Simple operation, no confusing interface
- Integrated oxygen flow meter and pressure gauge
- Efficient ozone generator, low oxygen demand for ozone output
- Stainless Steel enclosure
| More Information | |
|---|---|
| Concentration at Rated Flow | 5.80% |
| Operating Pressure | 0.0 to 80 PSI (0.0 to 5.62 Bar) |
| Max Operating Pressure | 80 PSI (5.62 Bar) |
| Supply Gas | Oxygen |
| Adjustable Ozone Output Dial | Yes |
| Cooling | Water Cooled |
| Ozone Production Method | Corona Discharge |
| Flowmeter | Yes |
| Pressure Gauge | Yes |
| Operating Frequency | High Frequency 5,000 - 30,000 Hz |
| Ozone/Oxygen Connections | 3/8-in Compression Stainless Steel Inlet - Ozone/Oxygen Connections 1/2-inch Brass Female NPT - Water Connections |
| Ozone Output | 300 g/hr. |
| Weight | 180.0 lbs. |
| Electrical | 220 VAC 60 Hz 2400 Watts |
| Dimensions | 17" x 24" x 30" |
| Warranty | 1 Years |
| Rated Flow | 60 LPM (127.1 SCFH) |
| Total Generator Information | |
 |
|
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered.
Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.