Product Overview
This ozone injection system is designed to quickly integrate into an existing water line. This Waterzone system produces, and introduces, 200 g/hr of ozone in up to 300 GPM of water flow. The Waterzone Ozone Injection systems offer turn-key ozone systems, with reliability and performance you can trust. Optional equipment can be added to each of the Waterzone systems, in order to customize the system to your exact needs.
| Optional Equipment | |
| Equipment | Description |
|---|---|
| Dissolved Ozone Monitor | Monitors and control ozone level in the water (in ppm) |
| ORP Monitor | Monitors ORP level in water, will also control ozone level with indirect reading |
| Water Flow Switch | Will start and stop system based completely on water flow |
| Temperature Sensor | Monitors ambient temperature to keep ozone generator safe (necessary if internal compressor is used) |
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator (necessary if internal compressor is used) |
| Remote Ambient Ozone Sensor | Monitor ozone levels near point of use for safety purposes |
| Ozone Destruct Unit | Will destroy all undissolved ozone from contact tank and includes water trap |
| Hour Meter | Displays Ozone generator run time |
Features
- Introduces 200 grams/hour ozone in up to 300 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 300 GPM Water Flow with 2.9 PPM Dissolved Ozone Level
- Customizable system can be configured for your specific application
- High efficiency with excellent superb transfer of ozone
|
More Information
|
|
|---|---|
| Adjustable Ozone Output Dial | Yes |
| Cooling | Water Cooled |
| Flowmeter | Yes |
| Pressure Gauge | Yes |
| Ozone Output | 200,000 mg/h (200 g/h) |
| Weight | 1.2000 |
| Electrical | 220 VAC 60 Hz |
| Dimensions | 70 x 32 x 82 inches (177.8 x 81.3 x 208.3 cm) |
| Warranty | 1 Years |
| Materials Wetted | Kynar, Stainless Steel, Viton® |
| Max Water Flowrate | 300 GPM |
| Contact Tank Size | 140 Gallons |
| Mounting Style | Skid Mounted |
| Max Water Pressure | 100 PSI (7.03 Bar) |
| Oxygen Production | 23.6 LPM (50 SCFH) |
| Operating Water Pressure | 50 PSI (3.52 Bar) |
| Water Connections | Inlet and Outlet will be 2-in FNPT connections |
| Water Flowrate @ 2.0ppm | 300 GPM |
| Water Flowrate @ 4.0ppm | 200 GPM |
| Waterzone Information | |
 |
|
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
