This ozone injection system is designed to quickly integrate into an existing water line. This Waterzone system produces, and introduces, 30 g/hr of ozone into 50 GPM of water flow. The Waterzone Ozone Injection systems offer turn-key ozone systems, with reliability and performance you can trust. Optional equipment can be added to each of the Waterzone systems, in order to customize the system to your exact needs.
30 gram/hour Ozone Generator
15 SCFH Oxygen Concentrator
Ozone Injection System
3/4 HP Water Injection Pump, MK-784 Venturi Injector, 25 Gallon Stainless Steel Contact Tank, De-Gassing Valve
Siemens 7" Touch Screen Interface
Microprocessor Control, Ambient Ozone Sensor, Hour Meter, Temperature Sensor, Ambient Relative Humidity Sensor, Water Flow Switch
Painted Steel Controls Cabinet
Interconnecting Teflon tubing, mounting rack, clamps, etc.
Installation and Operation Manuals
K-7404 Ozone Test Kit to verify ozone concentrations in the water
AS-500 Dissolved Ozone Monitor
Monitors and controls ozone level in the water (in ppm)
Monitors ORP level in water, will also control ozone level with indirect reading
Remote Ambient Ozone Monitor
Monitors ozone levels near water point of use for safety purposes
Destroys all undissolved ozone from contact tank and includes water trap
Provides compressed air for oxygen concentrator which eliminates the need for compressed air supply
50 Hz Power
Necessary for overseas use
Introduces 30 grams/hour ozone into 50 GPM water flows
Produces ozone from integrated Oxygen Concentrator
Will provide 50 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
Customizable system can be configured for your specific application
High efficiency with excellent superb transfer of ozone
All plumbing and fittings are stainless steel
Tri-Clamp connections are used
Adjustable Ozone Output Dial
30,000 mg/h (30 g/h)
220 VAC 60 Hz
44" x 18" x 70.5" (111.8 x 45.7 x 179.1 cm)
Max Water Flowrate
Contact Tank Size
Max Water Pressure
100 PSI (7.03 Bar)
7.08 LPM (15 SCFH)
Operating Water Pressure
50 PSI (3.52 Bar)
Inlet and Outlet will be 1.5-in Sanitary connections
Water Flowrate @ 2.0ppm
Water Flowrate @ 4.0ppm
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY within the state of California.
They are to be used in unoccupied spaces only.
Health hazard warning: emits ozone.