The Atlas 30 Ozone Generator is capable of producing ozone at up to 12% by weight, at 1 LPM of oxygen flow. At only 5 LPM of oxygen flow, this generator will produce 30 g/hr of ozone. This is the perfect ozone generator when high concentrations of ozone are needed at low oxygen flow rates. This ozone generator produces the highest concentration of any air cooled ozone generator on the market. This makes for a low cost, and easy to use, setup for your laboratory or other high O3 concentration application.
The Atlas-30 can be mounted in a standard 19" rack, or be used as a bench-top ozone generator. This is a easy to use, convenient ozone generator for your application.
Features
30 g/hr Ozone from 4 LPM of Oxygen at 9% by weight
25 g/hr Ozone from 3 LPM of Oxygen at 10% by weight
Ozone Produced at up to 12% by weight
Adjustable Ozone Output From 0-100%
Air Cooled, Rack Mountable Ozone Generator
Efficient ozone production with low operating costs
Standard working pressure of 20 PSI
Low Oxygen demand for ozone output
More Information
Concentration at Rated Flow
4%
Max Operating Pressure
50 PSI (3.52 Bar)
Supply Gas
Oxygen
Adjustable Ozone Output Dial
Yes
Cooling
Air Cooled
Corona Cell Materials
Aluminum with Ceramic Dielectric
Flowmeter
No
Pressure Gauge
No
Operating Frequency
High Frequency 5,000 - 30,000 Hz
Ozone/Oxygen Connections
1/4" Stainless Steel Compression
Ozone Output
30 grams/hour (1.59 lbs/day)
Weight
27.0000
Electrical
120 VAC 60 Hz
Dimensions
7 x 19 x 14 inches (17.8 x 48.3 x 35.6 cm)
Warranty
Ozone Solutions Warranty: 1 Year Manufacturer Warranty: 5 Years
Rated Flow
10 LPM (21.19 SCFH)
In Stock
Call for Availability
Operating Pressure
10 to 50 PSI (0.7 to 3.52 Bar)
Warranty Information
Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.
California Regulatory Warning
All of Ozone Solutions ozone generators are intended for industrial use ONLY.
Use in unoccupied spaces only.
Health hazard warning: emits ozone.
This product is not CARB Certified (Ozone Emissions for Air Cleaners).
Product Disclaimer: Does not meet California air cleaner regulation requirements; cannot be shipped to California.